agentmor.blogg.se - Cek ping di run

The tool tests a computer's network connection for common issues, port blocking, and network latency by establishing connections to network and Internet services via UDP, TCP, HTTP and HTTPS. The tool… Chrome Connectivity Diagnostics is a fast and simple network testing and troubleshooting tool for Chrome and Chrome OS. Use this option to see the full list of Ping options and usage syntax.Chrome Connectivity Diagnostics is a fast and simple network testing and troubleshooting tool for Chrome and Chrome OS. Good for finding out how many packets your routers can quickly handle, which is in turn good for diagnosing problems that only appear with large TCP window sizes. Send preload packets as fast as possible, then fall into a normal mode of behavior. This used to stress test the performance of a network and should be avoided. Display additional ICMP packets that provide very detailed information. Check very large packets that must be fragmented. This only works for hosts that can be directly reached without using any routers. Use this when you suspect routing problems and ping can't find a route to the target host. Target host may not provide the information.

-R Use IP's Record Route option to determine what route the ping packets are taking.

This is rarely useful if you suspect data-dependent problem. Pattern is a string of hexadecimal digits to pad the end of the packet with. Use this to avoid contacting a nameserver.

This is usually only helpful when operating over cellular, satellite or other high latency networks. Ping with a longer timeout to identify latency problems. The value ranges in Table 1-1 are based on a Huawei NE40E running V800R011C10.

milliseconds, to wait for a response before the message is declared to be timed out or lost. Continuous ping is a common debugging method to check whether IPv4/IPv6. This option is convenient for scripts that periodically check network behavior.

Your options depend on the implementation. If a fault indicator is on, follow the cable from your PC to the router to make sure it is properly connected, then call your cable or broadband provider if necessary.

Check that the router has the proper indicators light (and no faults), including the one that indicates a good connection to your PC.

As the ping command transmits packets at about 1 per second, you should be able to see the data light blink.

Most PC network ports have an indicator light that indicates a good connection and one that blinks as data is transferred.

Check your wireless connection or the connection from your PC to your router, especially if it was working previously.

If this fails, your TCP/IP is not functioning correctly, and your network adapter needs to be reconfigured. Sendto: No route to hostThis may mean the address of the gateway is incorrect or that the connection from your PC is not up and running.